LiFePO₄ Battery LII 12V 150Ah LCD
12V LiFePO₄ battery with built-in LCD display, providing reliable energy storage for mobile and off-grid systems. According to the supplied technical data sheet, it is a 12.8V 150Ah unit with M8 terminals, low self-discharge, and long cycle life.
- Nominal voltage: 12.8V
- Nominal capacity: 150Ah
- Stored energy: 1.92kWh
- Cycle life: 4000+ cycles at 0.2C load
- Max. discharge current: 100A
- Connection: M8 terminal
Recommended use: for EnergonX systems • motorhome • boat • mobile power supply • smaller off-grid systems
Which EnergonX PowerBox products is it compatible with: 12V versions of EXPLORER, KARAVÁN, and NOMÁD
Condition for connecting the accessory: the battery size and the 12V system voltage must be compatible with the given EnergonX unit
- Product code:
- {EX2200-A012}
- Width:
- 34 cm
- Length:
- 18 cm
- Height:
- 22.6 cm
LiFePO₄ Battery LII 12V 150Ah LCD
12V LiFePO₄ battery with built-in display, low self-discharge, and a design intended for long service life. Based on the supplied technical data sheet, it is a 12.8V 150Ah battery with M8 terminals and an ABS housing.
It can be a good battery choice for EnergonX systems where reliable 12V energy storage, around 1.92kWh stored energy, and 100A discharge capability are important.
What is it for?
For energy storage in mobile and off-grid 12V systems, especially where long cycle life and stable LiFePO₄ technology are an advantage.
Why is it useful?
It can provide more than 4000 cycles, has low self-discharge, and its 100A discharge level is sufficient for many typical 12V applications.
What should you pay attention to?
As a LiFePO₄ battery, it must not be charged below 0 °C, and it should always be matched to the correct charging profile and the physical dimensions of the system.
| Aspect | What does this accessory offer? |
|---|---|
| Product type | 12V LiFePO₄ battery |
| Nominal voltage | 12.8V |
| Nominal capacity | 150Ah |
| Stored energy | 1920Wh / 1.92kWh |
| Cycle life | More than 4000 cycles at 0.2C load |
| Self-discharge | Up to approx. 3.5% per month at 25°C |
| Charge voltage | 14.6 ± 0.2V |
| Recommended charger current | 10A |
| Discharge current | 100A |
| Max. pulse current | 100A for less than 3 seconds |
| Discharge cut-off voltage | 10.0V |
| Dimensions | 340 × 180 × 226 mm |
| Weight | Approx. 11 kg |
| Case material | ABS |
| Terminal | M8 |
Use and important notes
- It works well as a battery in 12V systems where stable energy storage and long cycle life are important.
- The M8 connection allows easier installation with properly crimped cable terminals.
- With dimensions of 340 × 180 × 226 mm, it may fit in several medium and larger EnergonX units.
- Its 100A discharge capability makes it suitable for many typical 12V applications.
Temperature and operating data
- Charging temperature: between 0 and 45 °C.
- Discharge temperature: between -20 and +60 °C.
- Storage: recommended between 0 and 45 °C.
- As a LiFePO₄ battery, it must not be charged below freezing.
Warnings
- Charging of the LiFePO₄ battery must not be started below 0 °C.
- Always charge it with a charger using the correct 14.6V LiFePO₄ charging profile.
- Before installation, the physical size and connection layout must be checked in the given EnergonX unit.