LiFePO4 Battery HUM 12V 150Ah
12V LiFePO₄ battery that provides a larger energy reserve for mobile, vehicle-based, marine, and off-grid use with its 150Ah capacity and 1920Wh stored energy. The built-in 110A intelligent BMS, long cycle life, and series-parallel expandability make it a versatile energy storage solution.
- Nominal voltage: 12.8V
- Nominal capacity: 150Ah
- Stored energy: 1920Wh / 1.92kWh
- BMS: intelligent 110A protection
- Cycle life: up to 6000 cycles
- Weight: approx. 13.25 kg
Recommended use: solar system • motorhome • boat • off-grid power supply • backup energy • external 12V energy storage
Which EnergonX PowerBox products is it compatible with: all 12V EnergonX PowerBox types, if the physical size and connection are suitable
Condition for connecting the accessory: a 12V system, proper cabling, M8 connection, and installation or mounting adapted to the specific use are required
- Product code:
- {EX2200-A009}
- Width:
- 33 cm
- Length:
- 17.5 cm
- Height:
- 22.2 cm
LiFePO4 Battery HUM 12V 150Ah
12V LiFePO₄ battery with intelligent 110A BMS and 1920Wh stored energy. It is advantageous for applications where higher capacity, long service life, and suitability for outdoor, vehicle-based, or off-grid use are important.
Based on the supplied data, this type can be a good choice for motorhomes, boats, solar energy storage, or general off-grid use. Series and parallel expandability also makes it possible to build larger energy storage systems.
What is it for?
For external 12V energy storage, mobile systems, boating and motorhome use, as well as solar or emergency backup power supply.
Why is it useful?
It offers long cycle life, intelligent BMS protection, full deep-discharge usability, and expandable system connection options.
What should you pay attention to?
As a LiFePO₄ battery, it must not be charged below 0 °C, and it should always be matched to the correct charging profile and the actual physical and electrical characteristics of the system.
| Aspect | What does this accessory offer? |
|---|---|
| Product type | 12V LiFePO₄ battery |
| Nominal voltage | 12.8V |
| Nominal capacity | 150Ah |
| Stored energy | 1920Wh / 1.92kWh |
| Cycle life | Up to 6000 cycles according to the supplied source |
| Service life | Up to 10 years |
| BMS | Built-in intelligent 110A protection |
| Protection | Protection against overcharge, deep discharge, overcurrent, overheating, and short circuit |
| Charging temperature | Between 0 °C and 50 °C |
| Discharge temperature | Between -20 °C and +60 °C |
| Cell type | A+ LiFePO₄ cells |
| Terminal | M8 |
| Expandability | 4S4P connectivity, up to a total capacity of 600Ah and up to 24V / 36V / 48V systems |
| Weight | 13.25 kg |
| Warranty | 5 years according to the supplied source |
Use and important notes
- As an external 12V battery, it can be used well for motorhome, boat, solar, and general off-grid power applications.
- The 150Ah capacity already provides a more serious energy reserve in systems where longer runtime is needed.
- The 110A BMS is an important practical advantage from a protection and safety standpoint.
- Its series and parallel expandability allows larger systems to be built from it.
Temperature and operating data
- According to the supplied source, it can be used between 0 and 50 °C when charging, and between -20 and +60 °C when discharging.
- For winter use, it may provide better cold tolerance on the discharge side, but charging must still not be started below 0 °C.
- As a LiFePO₄ battery, the correct charging profile and proper system matching are especially important.
- In off-grid systems, full deep-discharge usability and long service life can be important practical advantages.
Warnings
- As a LiFePO₄ battery, charging conditions must always be matched to the correct charging profile and temperature.
- The source highlights winter usability, but the specified charging range starts at 0 °C, so charging must not be started below freezing.