Inverter - FOVAL – 12 V → 220 V/1500W (modified sine wave)
12V DC powered car inverter with LCD display, EU socket, and dual USB output, capable of providing 220–240V AC power from EnergonX 12V systems for smaller general-purpose loads. The unit has a modified sine wave output, so it is primarily recommended for simpler, less sensitive devices.
- Output: 220–240V AC, EU socket
- Power versions: 750W / 1000W / 1300W continuous, 1500W / 2000W / 2600W peak power
- USB: 2 USB ports, 3.1A total
- Display: LCD for checking input voltage and load status
- Efficiency: nominally above 90%
- Protection: overload, overheating, short circuit, voltage limit monitoring
Recommended use: camping • boat • service vehicle • mobile workshop • occasional supply for smaller 230V loads
Which EnergonX PowerBox products is it compatible with: all 12V EnergonX PowerBox products, with proper power sizing and cabling
Condition for connecting the accessory: adequate 12V supply-side cable cross-section, proper fuse protection, and inverter power matched to the load are required
- Product code:
- {EX2310-INVFOV-1500}
FOVAL 12V → 220V car inverter with LCD display and dual USB output
Compact 12V DC powered inverter that provides 220–240V AC output through an EU socket and also offers two USB ports for charging smaller devices.
The unit delivers a modified sine wave output, so it is primarily ideal for general, less sensitive 230V devices. It can be a good choice in vehicles, boats, camping, mobile workshops, or alongside smaller off-grid systems.
What is it for?
To provide occasional 230V supply from a 12V battery for smaller general loads and USB-powered devices.
Why is it useful?
It is easy to install, offers LCD feedback, includes dual USB ports, and is available in several power levels.
What should you pay attention to?
As a modified sine wave inverter, it is not ideal for every 230V device. For sensitive or inductive loads, a pure sine wave inverter is recommended.
| Aspect | What does this accessory offer? |
|---|---|
| Product type | 12V DC → 220–240V AC car inverter |
| Output waveform | Modified sine wave |
| Input voltage | 12V DC, approx. 9–15.5V operating range |
| Output | 1 × EU socket + 2 × USB |
| USB power | 3.1A total |
| Power versions | 750W / 1000W / 1300W continuous |
| Peak power | 1500W / 2000W / 2600W |
| Efficiency | Nominal efficiency above 90% |
| No-load current | Less than 0.8A |
| Display | LCD for monitoring input voltage and load status |
| Protection | Low / high voltage, overload, overheating, short-circuit protection |
| Weight | Approx. 0.85 / 1.0 / 1.2 kg depending on power version |
Sizing notes
- On the 12V side, significant current draw must be expected at higher loads.
- Around 750W, the input current may already approach 70A.
- Around 1000W it may exceed 90A, and around 1300W it can reach about 120A.
- This requires adequately sized cabling and a fuse placed close to the battery.
Use and important notes
- Always choose the power version that matches the load.
- Connect the inverter using short 12V cables with adequate cross-section.
- Install the unit in a well-ventilated location.
- Peak power is intended only for short-term loads; for continuous use, the continuous power rating must be observed.
Warnings
- Because it is a modified sine wave inverter, it is not the ideal choice for refrigerators, compressors, some pumps, sensitive power supplies, audio equipment, or some printers.
- The continuous power rating must not be exceeded; peak load is only for short duration.
- At high power, current draw on the 12V side becomes very high, so proper cabling and fuse protection are especially important.
Package contents
- FOVAL inverter (selected power version)
- 2 × connection cables
- 2 × spare fuses
- User manual