230V charger – LiFePO4 battery charger 12V10A (for LiFePO₄ charging only)
230V intelligent LiFePO₄ battery charger designed exclusively for charging 12V LiFePO₄ batteries. The 10A version supports fast and safe charging with a 14.6V charging profile, selectable 5A / 10A charging current, LCD status display, and multiple protection functions.
- Application: exclusively for charging LiFePO₄ batteries
- Charging profile: 14.6V output optimized for 12V systems
- Charging current: selectable 5A or 10A
- Recommended battery capacity: 15Ah–60Ah
- Output: crocodile clip connection
- Protection: short circuit, overcurrent, overvoltage, reverse polarity, overheating
Recommended use: external charging of small and medium LiFePO₄ batteries • workshop • garage • motorhome • solar system • boat
Which EnergonX PowerBox products is it compatible with: all 12V EnergonX PowerBox products that use a 12V LiFePO₄ battery and allow direct external charging
Condition for connecting the accessory: it may only be connected to a 12V LiFePO₄ battery, with correct polarity
- Product code:
- {EX2310-MB-12V10A}
- Width:
- 11606 cm
- Length:
- 9.5 cm
- Height:
- 6.2 cm
230V charger – LiFePO4 battery charger 12V10A (for LiFePO₄ charging only)
Intelligent mains charger designed specifically for LiFePO₄ batteries, charging 12V systems with a 14.6V output profile.
The unit supports selectable 5A / 10A charging current, LCD status indication, several protection functions, and a low-current maintenance / recovery function. Based on the specification, this version is primarily ideal for LiFePO₄ batteries with 15Ah–60Ah capacity.
What is it for?
Exclusively for external charging, maintenance, and safe top-up charging of 12V LiFePO₄ batteries.
Why is it useful?
This is not a general-purpose battery charger, but a unit specifically tuned for LiFePO₄ chemistry with the correct 14.6V charging end voltage.
What should you pay attention to?
It is not recommended for other battery chemistries, and it may only be connected to the correct 12V LiFePO₄ battery with proper polarity.
| Aspect | What does this accessory offer? |
|---|---|
| Product type | LiFePO₄-specific intelligent battery charger |
| Supported system | 12V LiFePO₄ |
| Output voltage | 14.6V |
| Charging current | Selectable 5A / 10A (±0.3A) |
| Recommended battery capacity | 15Ah–60Ah |
| Recovery current | Approx. 600–800mA |
| Maintenance / trickle charging | Low-current maintenance charging |
| Mains input | 110–240V AC, 50/60Hz |
| Output | Cable with crocodile clips |
| Indication | Red: charging / Green: fully charged / Flashing: fault |
| Protection | Short circuit, overcurrent, overvoltage, reverse polarity, overheating |
| Housing | Plastic housing, black color |
| Plug | EU plug |
Use and important notes
- Use only with LiFePO₄ batteries. Do not use with other battery chemistries.
- Before connecting, always check correct polarity.
- If the charger supports it, use 5A mode for smaller batteries and 10A mode for larger ones.
- During charging, the red indicator is active; when fully charged, the green indicator appears.
- In case of a fault, the status indicator warns by flashing.
Operating and storage conditions
- Recommended operating environment: between -5°C and +40°C.
- The charger should be used in a well-ventilated place.
- Storage is possible in a wider temperature range; a dry environment is recommended.
- In case of overheating, the charger may automatically stop and restart after cooling down.
Package contents
- LiFePO₄ battery charger unit